TruXedo TruXport Problems

The TruXedo TruXport is a popular soft roll up tonneau cover for pickup trucks, designed to protect cargo and improve fuel efficiency.

While many users enjoy this product without issues, some have encountered challenges.

If you’re a current owner or considering purchasing one, you might be wondering about potential problems.

Don’t worry – I’m here to help! In this article, I’ll cover the most common issues TruXport users face and provide solutions.

Many of these fixes are straightforward, so even if you’re not particularly handy, you should be able to tackle them.

Let’s dive in and explore how to get the most out of your TruXport cover.

TruXedo TruXport: Common Problems and Solutions

Water Pooling and Leakage

One of the most frequently reported issues with the TruXedo TruXport is water pooling on the cover and leaking into the truck bed.

This can be frustrating, especially if you’re relying on the cover to keep your cargo dry.

Why It Happens

Water pooling often occurs due to:

1. Insufficient tension in the cover
2. Sagging support bars
3. Improper installation
4. Normal wear and tear over time

How to Fix It

1. Check and Adjust Tension: Make sure the cover is pulled tight across the truck bed. You can do this by:

• Opening the tailgate and cover
• Loosening the tension control at the front of the cover
• Pulling the cover tight and re-tightening the tension control

1. Inspect Support Bars: Look for any bent or damaged support bars. If you find any, contact TruXedo for replacements.
2. Verify Proper Installation: Double-check that the cover is installed correctly according to the manual. Pay special attention to:

• The positioning of the side rails
• The seal between the cover and the truck bed

1. Add Additional Drainage: If water is still pooling, you can create small drainage holes in low spots. Be careful not to make them too large, as this could compromise the cover’s integrity.
2. Park on an Incline: When possible, park your truck on a slight incline to encourage water runoff.

Remember, some water pooling is normal, especially in heavy rain.

However, if you’re experiencing significant leakage, it’s worth contacting TruXedo customer support for additional guidance.

Sagging Cover

A sagging cover not only looks unsightly but can also lead to water pooling and potential damage to your cargo.

Causes of Sagging

1. Weak or damaged support bars
2. Insufficient tension
3. Normal material stretching over time

Solutions

1. Adjust Tension: Similar to addressing water pooling, ensure your cover is properly tensioned.
2. Inspect and Replace Support Bars: Check each support bar for damage or weakness. If you find any issues, contact TruXedo for replacements.
3. Add Support: For a temporary fix, you can add additional support under the cover. Some users have had success with:

• PVC pipes cut to size
• Wooden dowels
• Aftermarket support kits designed for tonneau covers

1. Consider Replacement: If your cover is old and significantly stretched, it might be time for a replacement. Contact TruXedo to discuss your options.

Insufficient Tension

Proper tension is crucial for your TruXport to function correctly. Insufficient tension can lead to sagging, water pooling, and even damage to the cover.

Identifying Tension Issues

Look for these signs:

• Loose or flapping material
• Visible sagging between support bars
• Difficulty latching the cover

Fixing Tension Problems

1. Adjust the Tension Control:

• Locate the tension control at the front of the cover
• Loosen it slightly
• Pull the cover tight
• Re-tighten the control

1. Check Side Rails: Ensure the side rails are properly installed and not interfering with the cover’s tension.
2. Inspect for Damage: Look for any tears or stretching in the material that might be preventing proper tensioning.
3. Temperature Considerations: Remember that the cover may expand or contract with temperature changes. You might need to adjust tension seasonally.

Poor Fit for Specific Truck Models

Some users have reported that the TruXport doesn’t fit their truck properly, especially with newer models or less common truck bed sizes.

Addressing Fit Issues

1. Double-Check Compatibility: Verify that you’ve ordered the correct model for your specific truck make, model, and year.
2. Measure Your Truck Bed: Carefully measure your truck bed and compare it to the specifications provided by TruXedo.
3. Contact TruXedo: If you’re certain you have the correct model but it’s not fitting properly, reach out to TruXedo. They may have updated designs or alternative solutions.
4. Professional Installation: Consider having the cover professionally installed. An expert might be able to make minor adjustments for a better fit.
5. Customization: As a last resort, some users have successfully modified their covers slightly for a better fit. However, this should be done cautiously as it may void your warranty.

Weak Support Bars

The support bars play a crucial role in maintaining the cover’s shape and preventing sagging. Weak or damaged support bars can lead to multiple issues.

Identifying Weak Support Bars

Look for:

• Visible bending or warping
• Cracking or splitting
• Sagging between bars

Fixing Support Bar Issues

1. Inspect Regularly: Check your support bars periodically for any signs of damage.
2. Replace Damaged Bars: If you find any issues, contact TruXedo for replacement bars. They often cover this under warranty.
3. Proper Storage: When rolling up the cover, ensure the bars are properly aligned to prevent unnecessary stress.
4. Avoid Overloading: Don’t place heavy objects on top of the cover, as this can strain the support bars.

Flimsy Material Quality

Some users have expressed concerns about the durability of the TruXport’s material, particularly in harsh weather conditions.

Protecting Your Cover

1. Regular Cleaning: Clean your cover with mild soap and water to remove dirt and debris that could wear down the material.
2. Avoid Harsh Chemicals: Don’t use strong detergents or petroleum-based products, as these can degrade the material.
3. Apply Protectant: Use a vinyl protectant designed for tonneau covers to help guard against UV damage and extend the life of your cover.
4. Proper Storage: When not in use for extended periods, consider storing the cover in a cool, dry place to prevent unnecessary wear.

Wind Resistance Issues

High winds can pose a challenge for the TruXport, potentially causing flapping or even damage to the cover.

Improving Wind Resistance

1. Ensure Proper Tension: A well-tensioned cover is less likely to catch the wind.
2. Check Latches: Make sure all latches are securely fastened before driving.
3. Consider Wind Deflectors: Some users have found success with aftermarket wind deflectors designed for tonneau covers.
4. Drive Cautiously: In high wind conditions, reduce your speed to minimize stress on the cover.

Inadequate Velcro Closures

The Velcro closures on the TruXport are designed to keep the cover secure, but some users have reported issues with their effectiveness.

Strengthening Velcro Closures

1. Clean Regularly: Remove any dirt or debris from the Velcro strips to ensure a strong connection.
2. Replace Worn Velcro: If the Velcro has lost its grip, contact TruXedo about replacement options.
3. Add Additional Closures: Some users have successfully added extra Velcro or other fasteners for added security.
4. Proper Alignment: Ensure the cover is properly aligned when closing to allow for maximum Velcro contact.

Limited Side-to-Side Adjustability

The TruXport’s design may not allow for much side-to-side adjustment, which can be problematic for some truck models.

Maximizing Adjustability

1. Careful Installation: Pay close attention to the side rail positioning during installation.
2. Loosen and Readjust: If needed, loosen the side rails and make small adjustments for a better fit.
3. Shims: In some cases, adding thin shims under the side rails can help with alignment.
4. Professional Help: If you’re struggling with adjustments, consider seeking help from a professional installer.

Noisy During Driving (Drumming Sound)

A common complaint is a drumming or flapping sound while driving, especially at higher speeds.

Reducing Noise

1. Check Tension: Ensure the cover is properly tensioned to reduce flapping.
2. Inspect Seals: Check that all seals are in good condition and making proper contact.
3. Add Soundproofing: Some users have had success adding thin foam strips along the side rails to dampen vibrations.
4. Consider a Bow System: An aftermarket bow system can help reduce drumming by providing additional support.

Durability Concerns in Extreme Weather

Extreme weather conditions can test the limits of any tonneau cover, including the TruXport.

Protecting Your Cover in Harsh Conditions

1. Regular Inspections: Check your cover more frequently if you live in an area with extreme weather.
2. Snow and Ice Removal: Gently remove any accumulated snow or ice to prevent damage.
3. UV Protection: In hot, sunny climates, use a UV protectant spray regularly.
4. Consider a Hard Cover: If you frequently face extreme weather, you might want to consider upgrading to a hard tonneau cover for added durability.

Final Thoughts

While the TruXedo TruXport has its share of potential issues, many of them can be addressed with proper maintenance and some simple fixes.

By staying proactive and addressing problems early, you can extend the life of your cover and ensure it continues to protect your truck bed effectively.

Remember, if you’re ever unsure about a repair or adjustment, don’t hesitate to reach out to TruXedo’s customer support or consult with a professional installer.

With a little care and attention, your TruXport can provide years of reliable service.