The TruXedo Lo Pro tonneau cover is a popular choice for truck owners looking to protect their cargo and improve fuel efficiency.

While many users enjoy this low-profile, roll-up cover, some have encountered issues.

As an owner or potential buyer, you might be wondering about these problems and how to address them.

Don’t worry – I’ve got you covered. In this article, I’ll walk you through the most common TruXedo Lo Pro problems and their solutions.

Many of these fixes are straightforward, so you’ll be back to enjoying your truck bed cover in no time.

TruXedo Lo Pro Problems

TruXedo Lo Pro Tonneau Cover: Common Problems and Solutions

Leaking at Corners

Leaking at Corners

One of the most frustrating issues truck owners face with the TruXedo Lo Pro is water leakage, especially at the corners.

This problem can lead to wet cargo and potentially damage items in your truck bed.

Why It Happens

Leaks often occur due to improper installation, worn-out seals, or misalignment of the cover.

The corners are particularly vulnerable because they’re where different parts of the cover meet.

How to Fix It

Check the installation: Make sure the cover is installed correctly according to the manual. Pay special attention to the alignment of the side rails and the tension of the cover.

Inspect the seals: Look for any damage or wear on the rubber seals around the edges of the cover. If you find any issues, you may need to replace these seals.

Add extra sealing: Apply weatherstripping tape or foam tape to problem areas. This can provide additional protection against water intrusion.

Adjust the tension: Sometimes, the cover may be too loose, allowing water to seep in. Try adjusting the tension of the cover according to the manufacturer’s instructions.

Clean the seals: Dirt and debris can prevent the seals from working properly. Clean them regularly with a mild soap solution and a soft cloth.

Poor Installation Instructions

Poor Installation Instructions

Many users have reported that the installation instructions for the TruXedo Lo Pro are confusing or incomplete.

This can lead to frustration and potentially incorrect installation.

Why It’s a Problem

Unclear instructions can result in improper installation, which may cause other issues like leaks, poor fit, or difficulty using the cover.

How to Address It

Read through all instructions before starting: This will give you a better overall picture of the installation process.

Look for online resources: Check for video tutorials or detailed guides on the TruXedo website or YouTube.

Contact customer support: If you’re stuck, don’t hesitate to reach out to TruXedo’s customer service for clarification.

Take your time: Don’t rush the installation process. It’s better to go slow and get it right than to hurry and make mistakes.

Consider professional installation: If you’re not confident in your DIY skills, it might be worth paying for professional installation to ensure it’s done correctly.

Difficulty Closing Tailgate

Difficulty Closing Tailgate

Some truck owners have reported issues with closing their tailgate after installing the TruXedo Lo Pro.

This can be particularly frustrating as it affects the basic functionality of your truck.

Causes of the Problem

This issue often stems from incorrect installation or incompatibility with certain truck models, especially those with multi-function tailgates.

Solutions

Check the rail position: Ensure the side rails are installed at the correct height. They may need to be adjusted to allow proper tailgate closure.

Verify compatibility: Double-check that the cover is compatible with your specific truck model and tailgate type.

Adjust the cover tension: Sometimes, loosening the cover slightly can provide the necessary clearance for the tailgate to close.

Inspect the tailgate seal: Make sure the rubber seal on your tailgate isn’t interfering with the cover. You may need to trim it slightly if it’s too thick.

Contact TruXedo: If you’ve tried these solutions and still have issues, reach out to TruXedo. They may have specific advice for your truck model or offer a different product that’s more compatible.

Improper Fit on Certain Truck Models

Improper Fit on Certain Truck Models

While TruXedo offers covers for a wide range of trucks, some users have found that the Lo Pro doesn’t fit their vehicle as well as expected.

Why This Happens

Variations in truck bed designs, especially with newer models or special editions, can sometimes lead to fit issues.

How to Handle It

Double-check your truck’s specifications: Ensure you’ve ordered the correct cover for your exact truck model, year, and bed size.

Carefully follow installation instructions: Sometimes, what seems like a fit issue is actually an installation error.

Make minor adjustments: You may need to slightly adjust the position of the rails or the tension of the cover for a better fit.

Use shims if necessary: In some cases, using small shims can help level out the rails for a better overall fit.

Contact TruXedo: If you’ve verified you have the correct model and followed all instructions, but still have fit issues, contact TruXedo. They may have additional solutions or be able to provide a replacement.

Flapping at High Speeds

Flapping at High Speeds

A common complaint about the TruXedo Lo Pro is that it flaps or makes noise when driving at high speeds.

This can be annoying and potentially damaging to the cover over time.

Reasons for Flapping

Flapping usually occurs when the cover isn’t tight enough or when there’s an issue with the tension system.

Fixing the Flap

Check the tension: Make sure the cover is properly tensioned according to the manual. You may need to adjust it seasonally as temperature changes can affect the fabric.

Inspect the tension control: Ensure the tension control at the front of the cover is working correctly and set to the right position.

Look for damage: Check the cover for any tears or damage that might be causing loose areas.

Consider wind deflectors: Some users have found success in reducing flapping by installing a small wind deflector at the front of their truck bed.

Use the included straps: When the cover is rolled up, always use the provided straps to secure it. This prevents wind from getting under the cover and causing damage.

Issues with Multi-Function Tailgates

Issues with Multi-Function Tailgates

Trucks with multi-function tailgates, like those on some GMC and RAM models, can sometimes have compatibility issues with the TruXedo Lo Pro.

Why It’s Problematic

The design of multi-function tailgates can interfere with the cover’s rails or sealing system, leading to fit issues or functionality problems.

Addressing Multi-Function Tailgate Issues

Check compatibility: Before purchasing, make sure TruXedo specifically states the Lo Pro is compatible with your multi-function tailgate.

Follow special instructions: If TruXedo provides specific instructions for multi-function tailgates, follow them carefully during installation.

Adjust rail position: You may need to position the side rails differently to accommodate the tailgate’s unique movement.

Consider alternative models: If you’re having persistent issues, TruXedo or other brands may offer models specifically designed for multi-function tailgates.

Seek professional help: A truck accessories specialist might be able to modify the cover or suggest alternatives that work better with your tailgate.

Low-Quality Hardware

Low-Quality Hardware

Some users have reported issues with the quality of the hardware provided with the TruXedo Lo Pro, such as easily stripped screws or flimsy clamps.

Impact of Poor Hardware

Low-quality hardware can make installation difficult and potentially compromise the cover’s security and longevity.

Dealing with Hardware Issues

Handle with care: During installation, be careful not to overtighten screws or bolts, which can lead to stripping.

Use better tools: Having the right tools can prevent damage to the hardware during installation.

Replace if necessary: If you find the provided hardware inadequate, consider replacing it with higher-quality alternatives from a hardware store.

Contact TruXedo: If you receive damaged or clearly subpar hardware, contact TruXedo for replacements.

Regular maintenance: Periodically check and tighten hardware to ensure everything stays secure.

Incompatibility with Bed Liners

Incompatibility with Bed Liners

Some truck owners have found that the TruXedo Lo Pro doesn’t work well with their existing bed liners, particularly drop-in liners.

Why This Is an Issue

Bed liners can interfere with the mounting of the cover’s rails or prevent proper sealing, leading to fit and leak issues.

Solutions for Bed Liner Compatibility

Check compatibility beforehand: Before purchasing, confirm whether the Lo Pro is compatible with your specific bed liner.

Consider a spray-in liner: Spray-in bed liners generally work better with tonneau covers than drop-in liners.

Modify the liner: In some cases, you may need to trim or modify your bed liner to accommodate the cover’s rails.

Use spacers: Some users have successfully used spacers to raise the rails above the bed liner.

Remove the liner: As a last resort, you may need to choose between your bed liner and the tonneau cover.

Velcro Durability Concerns

Velcro Durability Concerns

The Velcro used to secure the TruXedo Lo Pro can wear out over time, leading to a less secure cover.

Impact of Worn Velcro

Worn Velcro can allow the cover to come loose, potentially causing security issues or damage to the cover in high winds.

Maintaining and Fixing Velcro Issues

Regular cleaning: Keep the Velcro clean from dirt and debris, which can reduce its effectiveness.

Avoid overstretching: When closing the cover, avoid pulling it too tight, which can strain the Velcro.

Replace when necessary: If the Velcro starts to wear out, you can often purchase replacement Velcro strips from TruXedo or automotive stores.

Consider professional repair: For extensive Velcro damage, a professional repair might be the best option.

Use in conjunction with latches: Always use the cover’s latching system in addition to the Velcro for maximum security.

Final Thoughts

While the TruXedo Lo Pro tonneau cover can be a great addition to your truck, it’s not without its challenges.

By being aware of these common issues and their solutions, you can make an informed decision about whether this cover is right for you.

Remember, many of these problems have straightforward fixes, and with proper installation and maintenance, you can enjoy the benefits of your TruXedo Lo Pro for years to come.

If you encounter persistent issues, don’t hesitate to reach out to TruXedo’s customer support for assistance. Happy trucking!

Leave a Reply

Your email address will not be published. Required fields are marked *